Download Links & Installation Guide
Download links are available in this guide.
Follow the instructions explicitly for proper installation.
SigPlusExtLite
Version 1.0 R1013
Last Update: June 29, 2018
Copyright © 2018 Topaz Systems Inc. All rights reserved.
For Topaz Systems, Inc. trademarks and patents, visit www.topazsystems.com/legal.
Table of Contents
1.0 – Introduction………………………………………………………………………………… 3
2.0 – Operating Systems Supported………………………………………………………. 3
- – Install SigPlusExtLite………………………………. 3
- – Install the Topaz SigPlusExtLite Chrome Extension 4
– Run the Sample Web Page……………………….. 4
3.2.1 – Install SigPlusExtLite…………………………………. 5 3.2.2 – Run the Sample Web Page…. 6
- – Install SigPlusExtLite………………………………. 7
- – Install the Topaz SigPlusExtLite Opera Extension 7
– Run the Sample Web Page……………………….. 9
1.0 – Introduction
With SigPlusExtLite, you can capture handwritten signatures securely in Chrome, Firefox, Opera, and Edge browsers using Topaz signature pads. This document provides instructions on installing Topaz SigPlusExtLite.
2.0 – Operating Systems Supported
Topaz SigPlusExtLite can get used with web pages running in the latest versions of Chrome, Firefox, and Opera browsers installed on Windows 7/8.1/10 32-bit operating systems. The Topaz SigPlusExtLite Edge Extension can also be integrated into web pages running in the Edge browser installed on PCs running the Windows 10 operating system. For 64-bit Windows operating systems running the 64-bit Chrome browser, SigPlusExtLite should be run as a 32- bit application.
3.0 – Installation Steps
3.1 – Chrome
Using SigPlusExtLite in Chrome requires two steps. First, SigPlusExtLite must get installed. Then, it must install the SigPlusExtLite extension from the Chrome website.
3.1.1 – Install SigPlusExtLite
Look on the back of your signature pad, and find the model number (e.g., T-LBK460-HSB-R). Then, select the correct option below:
- If your signature pad model number ends in “-B-R,” “-HSB-R,” or “-BHSB-R,” download and save SigPlusExtLite to your computer’s desktop from the following link: topazsystems.com/Software/SigPlusExtLite.exe. Right-click on the “SigPlusExtLite.exe” installer, and choose “Run as Administrator.” Then, follow the steps in the installer.
- If your signature pad model number ends in “-BSB-R” or “-BBSB-R,” download and save SigPlusExtLite to your computer’s desktop from the following link: topazsystems.com/Software/SigPlusExtLiteBSB.exe. Next, right-click on the “SigPlusExtLiteBSB.exe” installer, and choose “Run as Administrator.” Then, follow the steps in the installer.
3.1.2 – Install the Topaz SigPlusExtLite Chrome Extension
- Start the Chrome
- Go to the Topaz “SigPlusExtLite” Background Extension page by navigating to the URL: https:/chrome.google.com/webstore/detail/Topaz-SigPlusExtLite- back/dhcpobccjkdnmibckgpejmbpmpembgco.
- On the opened page, click the “+ ADD TO CHROME” button displayed on the top right of the
- Click on the “Add extension” button in the confirmation dialog that
3.1.3– Run the Sample Web Page
After the SigPlusExtLite software is installed and the signature pad is connected to the PC, launch Chrome and navigate to the following page: https://sigplusweb.com/sign_chrome_ff_sigplusextlite.html.
Click on the “Sign” button, and the signing window will appear. Sign on your signature pad. To accept the signature, click the green checkmark icon. To clear the signing window and re-sign, click the red X. To cancel, click the red circle with the X.
3.2– Firefox
Using SigPlusExtLite in Firefox requires two steps. First, SigPlusExtLite must get installed. Then, it must set up the SigPlusExtLite extension for Firefox.
3.2.1– Install SigPlusExtLite
Remove any previous version of the SigPlusExtLite Firefox extension from the Firefox Add-ons manager page, Extension section.
Look on the back of your signature pad, and find the model number (e.g., T-LBK460-HSB-R). Then, select the correct option below:
- If your signature pad model number ends in “-B-R,” “-HSB-R,” or “-BHSB-R,” download and save SigPlusExtLite to your computer’s desktop from the following link: topazsystems.com/Software/SigPlusExtLite.exe. Ensure all the Firefox instances are closed and then right-click the “SigPlusExtLite.exe” installer, and choose “Run as Administrator.” Then, follow the steps in the installer.
- If your signature pad model number ends in “-BSB-R” or “-BBSB-R,” download and save SigPlusExtLite to your computer’s desktop from the following link: topazsystems.com/Software/SigPlusExtLiteBSB.exe. Next, make sure all the instances of Firefox are closed and then right-click the “SigPlusExtLiteBSB.exe” installer, and choose “Run as Administrator.” Then, follow the steps in the installer.
- Start the Firefox browser to complete the installation of the Firefox Extension. The browser prompts the user to allow the extension installation. Check the “Allow this installation” option and click the “Continue” button to complete the
Note:
- Step 3 on the previous page has to be performed for all the Windows log-in accounts by logging into Windows and starting the Firefox
- In some cases, the Firefox browser may not show the prompt mentioned in step 3 on the previous page; in those cases, the extension has to be manually enabled from the Firefox Add-on manager page: add-ons in the address bar, then going to the Extensions section and clicking the “Enable” button next to ”Topaz SigPlusExtLite Extension.”
- Finally, restart your browser.
3.2.2 – Run the Sample Web Page
After the SigPlusExtLite software is installed and the signature pad is connected to the PC, launch Firefox and navigate to the following page: https://sigplusweb.com/sign_chrome_ff_sigplusextlite.html.
Click the “Sign” button, and the signing window will appear. Sign on your signature pad. To accept the signature, click the green checkmark icon. To clear the signing window and re-sign, click the red X. To cancel, click the red circle with the X.
3.3– Opera
Using SigPlusExtLite in Opera requires two steps. First, SigPlusExtLite must get installed. Then, this must set up the SigPlusExtLite extension for Opera. Opera supports the installation of Chrome Extensions, and SigPlusExtLite leverages the Chrome Extension to capture signatures.
3.3.1 – Install SigPlusExtLite
Look on the back of your signature pad, and find the model number (e.g., T-LBK460-HSB-R). Then, select the correct option below:
- If your signature pad model number ends in “-B-R,” “-HSB-R,” or “-BHSB-R,” download and save SigPlusExtLite to your computer’s desktop from the following link: topazsystems.com/Software/SigPlusExtLite.exe. Right-click the
“SigPlusExtLite.exe” installer, and choose “Run as Administrator.” Then, follow the steps in the installer.
- If your signature pad model number ends in “-BSB-R” or “-BBSB-R,” download and save SigPlusExtLite to your computer’s desktop from the following link: topazsystems.com/Software/SigPlusExtLiteBSB.exe. Next, right-click the “SigPlusExtLiteBSB.exe” installer, and choose “Run as Administrator.” Then, follow the steps in the installer.
3.3.2 – Install the Topaz SigPlusExtLite Opera Extension
- Start the Opera
- Go to the Opera Add-ons page and install the “Download Chrome Extension” Add-on by navigating to the URL: https://addons.opera.com/en/extensions/details/download- chrome-extension-9/?display=en.
- On the opened page, click the “+ Add to Opera” button displayed on the top right of the After installation, to view the installed extension, type Ctrl+Shift+E.
- Go to the Topaz “SigPlusExtLite” Background Extension page on the Chrome web store by navigating to the URL:
https:/chrome.google.com/webstore/detail/Topaz-SigPlusExtLite- back/dhcpobccjkdnmibckgpejmbpmpembgco.
- On the opened page, click on the “+ ADD TO OPERA” button displayed on the top right of the page.
- Click “OK” in the Installation Confirmation dialog, as shown
- Go to the Extension Manager (Ctrl+Shift+E) and click the “Install” button to install and enable the extension.
3.3.3– Run the Sample Web Page
After the SigPlusExtLite software is installed and the signature pad is connected to the PC, launch Opera and navigate to the following page: https://sigplusweb.com/sign_chrome_ff_sigplusextlite.html.
Click the “Sign” button, and the signing window will appear. Sign on your signature pad. To accept the signature, click the green checkmark icon. To clear the signing window and re-sign, click the red X. To cancel, click the red circle with the X.
3.4_Microsoft Edge
With the current restrictions on providing extensions through the Microsoft Store, the Edge extension will get installed offline.
3.4.1– Install SigPlusExtLite
Look on the back of your signature pad, and find the model number (e.g., T-LBK460-HSB-R). Then, select the correct option below:
- If your signature pad model number ends in “-B-R,” “-HSB-R,” or “-BHSB-R,” download and save SigPlusExtLite to your computer’s desktop from the following link: topazsystems.com/Software/SigPlusExtLite.exe. Right-click the
“SigPlusExtLite.exe” installer, and choose “Run as Administrator.” Then, follow the steps in the installer.
- If your signature pad model number ends in “-BSB-R” or “-BBSB-R,” download and save SigPlusExtLite to your computer’s desktop from the following link: topazsystems.com/Software/SigPlusExtLiteBSB.exe. Next, right-click the “SigPlusExtLiteBSB.exe” installer, and choose “Run as Administrator.” Then, follow the steps in the installer.
3.4.2 – Install SigPlusExtLite Edge Certificate and Package
Download and save the executable to your computer from the following link: www.topazsystems.com/software/SigPlusExtLiteEdge.exe. Then, follow the steps in the installer. This executable installs the SigPlusExtLite Edge Certificate and Package containing the extension and UWP native messaging host application required to communicate with your Topaz signature pad.
3.4.3 – Run the Sample Web Page
After the SigPlusExtLite software is installed and the signature pad is connected to the client PC, launch the Edge browser and navigate to the following page: https://sigplusweb.com/sign_chrome_ff_sigplusextlite.html.
Click the “Sign” button, and the signing window will appear. Sign on your signature pad. To accept the signature, click the green checkmark icon. To clear the signing window and re-sign, click the red X. To cancel, click the red circle with the X.